The screw press machine is a very practical equipment, which reduces people's labor intensity during use. One machine can meet a large number of material handling needs, which can not only improve everyone's working environment, but also make people's work simple and convenient. Drive the reducer to push the blade shaft to rotate, the helix angle is pushed forward, and then extruded into the extruded pipe material, the water in the waste residue is extruded under the rotating extrusion of the helical blade, the extruded material is discharged from the discharge port, extruded The liquid flows out from the sieve holes and is concentrated in the water tank to achieve the purpose of solid-liquid separation, and the discharge resistance and the size of the discharge port can be changed.

1. The contact surface with the material is small and the friction force is low, which can improve the extrusion dehydration efficiency. No clogging and coiling phenomenon;

2. Low energy consumption, low investment and high efficiency;

3. The structure is simple, the equipment is made of stainless steel, with high strength, good corrosion resistance and long service life;

4. The driver is directly driven by the shaft, with stable and reliable operation and energy saving;

5. Select the outlet of the adjustable partition to increase the extrusion pressure and improve the dehydration rate;

6. Sustainable dehydration, strong working ability. Compared with the traditional dehydration method, it has the advantages of good dehydration effect, strong working capacity, low energy consumption and simple operation.

Screw presses are widely used, and can be used for extrusion dehydration of residues, xylose residues, wine tanks and other extraction waste residues, solid-liquid separation of kitchen waste, fruit and vegetable waste organic solid waste, dehydration and reduction of hazardous waste such as paint residue and dry film residue Extraction and dehydration of solid waste such as straw pulp, straw residue and other solid waste.

How to solve the problem of screw press material stuck?

The principle of the traditional screw press is to continue to transport the material in the hopper from the feed end to the feed end according to the promotion of the screw, and to reduce the material capacity according to the mutual restraint of the pressurized slag discharge door and the screen, so that part of the liquid Under the action of screw extrusion force, it is discharged according to the screen. When the feed hopper stops feeding, the compacted material existing between the screw and the screen loses the driving force for continuous feeding, and it is stuck between the screen and the screw and cannot be cleaned.

Early screw presses used manpower to open the sieve to clean up the materials stuck in the middle. Some technological processes without hygienic requirements cannot consider cleaning materials, but processing some food materials and some normal temperature conditions and gases cause chemical reactions to cause taste materials, which cannot Receiving material exists between the spiral and the screen for a long time, and the equipment needs to be cleaned every time it is used.

By adjusting the overall design of the screw, the new screw press can discharge the slag between the screen and the screw when the feeding is stopped, and a mobile jet washing device is installed outside the screen to complete the jet washing of the juice tray outside the screen cleaning.

If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com