News

Application range of screw press

time:2023-07-10 15:02:09hit:88

screw press

The structure of the screw press:


The screw press is composed of extrusion screw, spiral tube, transmission parts, feeding hopper and discharging hopper. Dirt enters the spiral tube from the feed hopper, is compressed and dehydrated under the influence of the extrusion screw, and is transported to the slag discharge port.


Features of screw press machine:


Compact structure, small footprint, easy installation and maintenance; except the inlet and outlet, other parts can be closed, the material will not overflow, and reduce air pollution.


1. Shaftless screw is used, which has a small contact surface with the material and low friction, which can improve the extrusion efficiency. No blockage, no coiling phenomenon;


2. The equipment is made of stainless steel, with high strength, good corrosion resistance and long service life;


3. The drive mechanism adopts shaft-mounted direct drive mode, which is stable and reliable in operation and energy-saving;


4. The outlet is equipped with a spring partition to increase the extrusion force and improve the dehydration rate;


5. Except for the import and export, the other adopts a sealed structure, and the use environment is clean and hygienic.


Application range of screw press machine:


Scope of use 1: Dehydration and compression of the slag intercepted by the trash grid in drainage pump stations, sewage treatment plants and water works.


Scope of use 2: Dehydration and compression treatment of wastewater in papermaking, winemaking, food, leather, textile, printing and dyeing, petrochemical and other fields.


Daily maintenance of screw press:


1. From the appearance, although cleaning is relatively simple, in order to facilitate the maintenance of the surface of the press equipment and avoid scratches with hard blocks, the motor parts cannot be exposed to water.


2. After the press machine is finished, the switching power supply should be cut off. After collecting the sap, dispose of the equipment promptly without condensing the debris inside the equipment.


3. The cleaning time of the screw shaft should not be too long, but every time it is cleaned, ingredients such as synthetic fibers or fresh fruit residues should be dragged out along the direction of the reeling machine and cleaned with tap water.






If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to:chuantaiscrewpress@gmail.com

10

Jul
2023