News

Introduction to the use of spiral pressing machine

time:2023-07-27 15:16:12hit:101

 spiral press

The spiral press is a very practical device that reduces people's labor intensity during use. A machine can meet a large amount of material processing needs, which can not only improve everyone's working environment, but also make people's work simple and convenient. Drive the reducer push the blade axis rotation, push the spiral angle forward, and then squeeze into the squeezing tube material, squeeze the water in the waste residue under the spiral leaf transportation rotation and squeeze, squeeze out the discharge from the outlet port, squeeze the squeeze The liquid flows out of the sieve holes and concentrates in the sink to achieve the purpose of solid solid solution separation, which can change the size of the discharge resistance and the size of the outlet.




1. The contact surface with the material is small and the friction is low, which can improve the squeezing dehydration efficiency. There is no blockage or winding phenomenon;




2. Low energy consumption, low investment, and high efficiency;




3. The structure is simple, the equipment is made of stainless steel, high strength, good corrosion resistance, and long service life;




4. The driver is directly driven by the axis, the operation is stable and reliable, and energy saving;




5. Select the exit of adjustable partitions to increase the pressure of extrusion and increase the dehydration rate;




6. Sustainable dehydration and strong work ability. Compared with traditional dehydration methods, the advantages of good dewatering effect, strong work ability, low energy consumption, and simple operation.




The spiral press is widely used, which can be used for squeezing dehydration, kitchen waste, fruit and vegetable garbage organic solid waste, paint residue, dry membrane residue and other hazardous wastes such as residual residue, wood glucose residue, and wine slot. , Fruit and Vegetables and other rhizomes, the extract of solid waste such as juice, grass slurry, straw breal residue, etc.


How to solve the problem of stuck in the spiral press material?


The principle of the traditional spiral pressing machine is based on the promotion of the spiral, and continues to transport the materials in the feed bucket from the feed end to the feed end. According to the mutual restraint of the slag discharge door and the screen, the material capacity is reduced, and some liquids make some liquids. Dedicated according to the sieve network under the action of spiral crowding pressure. When the inlet bucket stops the feed, the compression material that exists between the spiral and the screen loses the driving force of the continuous feed, and it cannot be cleaned between the screen and the spiral.




Early spiral pressing machine was to open the sieve net with the help of manpower, clean up the materials in the middle, and some process processes without hygiene requirements, and could not consider cleaning the materials. Accepting materials have long existed between the spiral and sieve, and each use of the device needs to be cleaned.




By adjusting the overall design of the spiral, a new type of spiral pressing machine can discharge the residue between the sieve network and the spiral when stopping the feeding, install a mobile jet rinse device outside the screen, and complete the spray rinse of the juice plate outside the screen network. Clean.






If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to:chuantaiscrewpress@gmail.com

27

Jul
2023