The screw press includes frame, transmission device, motor, feed inlet, shell, dehydration chamber, separation chamber, discharge outlet, outlet trough, mounting frame, dehydration chamber, separation chamber, main shaft, motor, main shaft, main shaft, feeding mouth, one end of the dehydration chamber, the mounting frame, and the bottom of the dehydration chamber. After dehydration, the solid has low water content and is easy to process and separate in the next step.
The screw press is inseparable from sludge and sewage during operation. The composition of this chemical substance is very harmful to the bearing. When choosing bearings, you should choose wear-resistant and good sealing, pay attention to daily lubrication and maintenance; if you find any problems with the bearings, you should immediately close them for inspection.
If the damage is serious, it should be replaced immediately. Pay attention to the drawings when installing, and don't be careless about the installation standards, so as not to cause more serious damage to the bearing due to improper installation. When the bearing is in normal operation, immediately clean the water marks with water, prevent rust in time, and clean the vicinity of the bearing seat frequently; although the components are small, you must pay attention to them during daily inspection and maintenance.
What problems should be paid attention to in the application of screw press?
1. Before feeding the screw press, the cone shape and the feeding port should be closed, and the torque force of the compression spring should be properly adjusted according to the nut. When the slag skin causes slag resistance, check the expected effect of the compression, and then adjust the clamping level and position of the spring appropriately to ensure that the expected effect of the compression is more satisfactory.
2. When feeding the screw press, prevent unclean things and other objects from entering the equipment. Thicker fruiting branches should be removed to prevent damage to the sieve drum. Feed should be as uniform as possible to get better expected results.
3. After the screw press is squeezed, the pressure spring should be relieved in advance, so that the cone moves under the push of the pomace, and the pomace behind is pressed too hard, which is conducive to cleaning. If it is not used for a long time, the equipment should be cleaned, and the rust-prone parts should be coated with grease for maintenance.
The screw press machine is a kind of solid-liquid separation equipment for various waste slag extrusion dehydration, which is composed of feed bin, pressing screw, spiral seamless steel pipe, slag discharge pipe and controller equipment. The waste residue to be processed enters the spiral seamless steel pipe from the feeding bin, and is squeezed, processed and dried under the action of the pressing screw. The water squeezed out from the raw material is collected into the connected stainless steel sink through the filter screen and discharged through the sewage pipe. After the raw material becomes smaller, it is discharged through the slag discharge pipe, which greatly reduces the net weight and capacity of scale slag and other dirt. The screw press machine is composed of sewage pipe area, feeding area, screw conveying area and feeding area. The grid slag enters the material area, and after being compacted by the screw press in the compaction area, the grid slag is discharged, and the sewage is introduced into the seepage pipe from the grid bar.
If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com
