Functions of kitchen waste disposal equipment:

Generally speaking, in the process of treatment, only a small amount of microorganisms need to be added, and then treated by microbial bacteria, and then decomposed into carbon dioxide by automatic dehydration, so that kitchen waste can be turned into organic fertilizer. The input organic waste will be reduced by 90% in a short period of time (12~24 hours), and it will become odorless, non-toxic and harmless coffee powder organic fertilizer with a water content of 40%. It can be directly used to grow vegetables, trees and plants after anaerobic fermentation. Therefore, the external pollution of kitchen waste is reduced, and the utilization of kitchen waste as feed and fertilizer can be effectively realized. Kitchen waste treatment equipment is specially developed for canteens, hotels and other industries. After the kitchen waste is pretreated, the organic matter in the waste is decomposed by biotechnology and fermented into organic fertilizer. So as to realize the reduction and harmless treatment.

Main features of kitchen waste treatment equipment

1. Advanced technology used in equipment:

In the current kitchen waste treatment equipment, most of the equipment can realize microbial treatment. After the food waste treatment equipment treats the food waste, the food waste can be turned into organic fertilizer;

2. The operation method of the equipment is convenient:

It is a very simple and convenient thing to directly use food waste treatment equipment to process food waste, and there is no need to deal with food waste headaches;

3. The equipment is solid and practical, and the operation method is simple:

The general structure of food waste treatment equipment is mostly made of stainless steel, which has a longer service life; at the same time, the equipment adopts automatic processing without cumbersome steps.

Installation process of kitchen waste treatment equipment:

1. Install the drainage pipe and drainage gate pipe of the kitchen waste disposal equipment: When installing the drainage pipe, it is necessary to cover the metal material boss and rubber gasket on the drainage pipe head to prevent water leakage. Receive the composed drain pipe to the food waste disposer and connect the gate pipe;

2. Remove the pipe: Remove the current pipe from the stainless steel sink to clear the blockage. Except for the installation of new houses, the drainage gate pipe should be taken out first, the pipe should be cleared with a water pipe dredger, and the connection between the horizontal drain pipe and the sewage pipe should be conveyed as much as possible:

3. Install the power supply system and air switch of part of the food waste treatment equipment (some product specifications need to be installed separately): cover the stainless steel sink bottle cap, fill it up, and then remove the cap to let the water drain. If there is water seepage, it should be repaired immediately so that the food waste treatment equipment can be used;

4. Place the sealing ring: place the rubber wiper sealing ring under the boss of the stainless steel sink, and then pass the boss of the stainless steel sink through the drain of the stainless steel sink. If the stainless steel sink is not suitable for rubber wiper seals, you can use a water pipe oil seal under the boss of the stainless steel sink. The nominal diameter specification is 90mm and the diameter is 110mm. If it does not meet the requirements, please contact the regional agent to purchase an adapter. Before installing the restaurant kitchen food waste shredder, drill a hole with a true diameter of 32-35mm on the console or sink of the restaurant kitchen. Drill holes in the easy-to-use area, take out the fulcrum screw cap of the key device, put the key device into the hole just drilled, and cover the fulcrum screw cap;

5. Connection: connect the kitchen waste disposal equipment and the small pendant group, and use the "quick lock" hanging mechanical equipment. The food waste disposal equipment can be locked with a 6.3 mm edged wrench (or the optional hex wrench);

6. Mounting and hanging connections: Apply the parts shown in the box to attach the connection parts under the stainless steel sink. Deepen and press the rubber wiper seal, metal liner and retaining sleeve onto the stainless steel sink boss, and tighten the component screws until all parts to be installed can be attached to the stainless steel sink.

If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com