Screw press is a kind of equipment widely used in food processing, agricultural production and environmental protection to separate liquid from solid matter. The use of the screw press will be introduced in detail below.
1. Preparation:
Before using a screw press, make sure that the equipment is in working order, clean and that necessary maintenance has been carried out. Check that all parts of the screw press are intact.
2. Raw material preparation:
Prepare the raw materials that need to be dehydrated, and ensure that the raw materials are cleaned and screened to remove excess impurities and water.
3. Adjust device parameters:
According to different raw material characteristics and dehydration requirements, adjust the parameters of the screw press, including the screw speed, the thickness of the material layer, the opening of the discharge port, etc. The adjustment of these parameters will affect the dehydration effect and yield.
4. Start the device:
Turn on the power to the screw press and follow the equipment operating instructions to start it. Ensure the normal operation of the screw press, and gradually adjust the parameters to achieve the best working condition.
5. Feeding and slagging:
Put the prepared raw materials evenly into the feeding port of the screw press. Under the action of the screw, the raw material will be squeezed gradually, so that the liquid will be separated. At the same time, the solid slag will be discharged through the slag discharge port.
6. Monitoring and tuning:
During the dehydration process, monitor the operation of the equipment in time. According to the concentration of the discharged liquid and the state of the dross, adjust the parameters in time to obtain the best dehydration effect.
7. Collection and handling of product:
The dehydrated liquid and solid are discharged through different outlets respectively. These products are collected and processed for further processing or disposal as desired.
8. Turn off the device:
After use, stop the screw press, turn off the power, and perform necessary cleaning work. Clean all parts of the equipment to ensure that the equipment is in good condition.
9. Maintenance:
Regularly maintain the screw press, including cleaning, lubricating, replacing wearing parts, etc., to prolong the service life of the equipment and maintain its stable working performance.
Summarize:
A screw press is a powerful piece of equipment that efficiently separates liquids from solids. The correct use method can improve the dehydration efficiency and product quality. At the same time, it is necessary to pay attention to the maintenance and maintenance of the equipment to ensure its long-term stable operation. During use, be sure to follow the equipment operating instructions to ensure safe production.
If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com
