The working process of the screw press is: the conveying screw pushes the material entering the material box into the pressing screw. By reducing the pitch of the pressing screw and increasing the shaft diameter, under the action of the resistance of the screen wall and the cone, the material contained in the material is The liquid (juice) is squeezed out, and the squeezed liquid flows out from the sieve holes and is concentrated in the juice receiving hopper. The pressed pomace is discharged through the discharge machine between the end of the screen cylinder and the cone, and a spring is installed at the rear of the cone. By adjusting the preload force and position of the spring,
Correct installation of screw press:
1. In order to ensure the safety and normal use of the screw press, it is very important to choose high-quality equipment, but it cannot be ignored during the installation process. Now, let’s take a look at the equipment process and standards of screw presses.
2. Before installation, please ensure that the equipment provided by the manufacturer meets the order requirements. After confirmation, you need to check the standards of the screws and other accessories provided by the manufacturer to check whether the standards meet the standards of the base. After confirming these questions, you can install the device. If you find that the standard parts do not match during the installation of the screw press, please contact the manufacturer immediately and remember not to force the installation, otherwise damage may occur.
3. After the basic equipment of the screw press is installed, it is the bracket installation, and the stability of the equipment must be ensured.
4. Care must be taken with the internal components and equipment of the screw press. During the equipment processing, it is necessary to manually check the reducer to understand the flexibility of rolling; whether the connection between components is reliable, and whether the connecting parts are smooth if necessary.
5. After the screw press is intact, the power can be started for trial operation. Of course, this is done under no-load conditions. Once everything is running normally, it can be used during normal hours.
What materials can a screw press press?
1. Screw presses are widely used, involving daily household waste, perishable wet waste, kitchen waste, agricultural wholesale market waste, landscape garden waste, agricultural waste, corn straw hay, farm waste, animal carcasses, slaughterhouse waste, and the food industry Garbage, traditional Chinese medicine waste, paper industry waste and other fields.
2. The screw press can press waste, energy, food crops and chemical waste. Its goal is to realize the energy and resource conversion and utilization of materials, and provide more usable materials for people.
3. The principle of the extrusion equipment is mainly to squeeze the liquid in the material. The liquid is discharged through the stainless steel screen, and then gathered in the water storage tank and discharged through the drainage pipe. Dried material is discharged through the inlet and outlet at the end of the stainless steel screen.
Screw presses can squeeze materials very cleanly:
1. The screw press uses a screw to process materials. It has fast operation speed and high pressure, so it processes the materials very well and can achieve very good material squeezing and dehydration effects.
2. This equipment improves the secondary utilization of resources to a great extent. These extruded materials can be reused, which greatly improves the possibility of resource use and enables these materials to meet people's diverse use needs and is very practical.
3. The screw press uses screw extrusion to process and squeeze the materials, and then discharges them through the filter, so the materials are squeezed very cleanly.
If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com
