News

Requirements for the use of screw presses

time:2023-07-03 15:12:07hit:118

screw press

Installation and operation of screw press:


(1) When installing the screw press, first check whether the opening size of the foundation bolts is consistent with the size of the base, then put the installation equipment into the prefabricated foundation, and tighten the fixing nuts in alignment.


(2) After the equipment is put into the foundation, the bracket and the embedded steel plate are welded correctly.


(3) After the press is installed, turn the reducer by hand to input the engine oil, and check whether there is any interference and stagnation in the moving parts, and whether the movement is flexible.


(4) Check whether the speed reducer (according to the arrow) is correct or not. (5) Start the transmission mechanism to make it run without load, and it can be put into production after it is normal.


Requirements for the use of screw presses:


1. Before feeding, the cone and discharge port should be closed, and the pre-tightening force of the pressure spring should be properly adjusted through the nut.


2. After the slag skin produces slag resistance, the compression effect should be checked, and then the compression degree and position of the spring should be adjusted appropriately to achieve a satisfactory compression effect.


3. Larger foreign objects, such as branches, should be cleaned to avoid damage to the screen. The feeding process should be as symmetrical as possible for better results.


4. After the pressing process is over, the spring should be released in advance to make the pomace move under pressure.


5. In addition, if the screw press is not used for a long time during shutdown, the inside must be cleaned to avoid damage to the equipment due to external factors such as corrosion.


Advantages of screw press:


1. Overall design: All machines are assembled by stainless steel plates and food hygiene and safe plastics. Simple structure, small footprint. Sturdy and firm, easy to maintain, the whole roll is high and low, usually partly low, the overall structure is neat and elegant.


2. Filter screen cleaning technology: The nozzle ejection fan selected by the conveyor belt cleaning system software reduces the water consumption of cleaning water. The uniquely designed filter rinser cleans the spout while the belt juicer is running.


3. Reliable operation features: The machine calibration equipment uses a solenoid valve to connect to the cylinder, operates on the principle of surrounding, fast reflection, one-sided calibration equipment of the filter belt, fast calibration, low posture frequency of all system software, and low strength of the calibration equipment.


4. The electronic control system is equipped with a complete protector to ensure the safety and reliability of the bare metal operation, and reasonably prevent damage to the bare metal caused by incorrect posture.






If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to:chuantaiscrewpress@gmail.com

03

Jul
2023