The technical characteristics and materials of the spiral dehydrator:
Leaves: Squeezing dehydrator Spiral blades to reinforcement to avoid damage and manufacture for stainless steel plates.
Stainless steel sieve: Stainless steel mesh product specifications: 0.5-2.5
Back pressure resistance equipment: dry and humidity can be adjusted according to the different regulations of solid chemicals; (manufacturing spiral squeezing dehydration mechanical equipment according to customer needs) This equipment is a dehydration and reduction in materials in various fields, and solid fluid separation equipment for solid materials or liquid materials Essence
Application of spiral dehydrator equipment:
Comprehensive treatment of fruits and vegetables, meals, and urban waste; biogas residue, sweet sorghum, water gourd, cassava residue, straw, sweet potato residue, potato residue, cane residue, algae, various oil residues, waste cellulose, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, medical waste, Fruit and vegetable waste, kitchen waste, urban waste treatment; separation of food waste, organic matter and inorganic objects; dehydration of poultry feces, such as feces, sheep dung, duck manure, etc., as well as wastewater in the slaughterhouse.
Spiral dewater inspection process:
The spiral dehydrator is used as a solid liquid separation mechanical equipment. It is more important to check the inspection during operation. It can check whether the equipment can run normally. If the problem can be found and dealt with as soon as possible, the probability of the common problems in the equipment work.
Generally speaking, the inspection process of the spiral dehydrator is from the switching power supply, the airflow switch to the spiral axis, and the conveyor belt. In front of the car inverter, check whether the power supply circuit is firm, complete and accurate, and turn on the power valve power switch to provide gas to the main control box. Then check each pneumatic component to check whether there are bad conditions such as air leakage and blockage. Check whether the location of the conveyor belt is appropriate. Open the centrifugal pump used for cleaning the conveyor belt, check whether the pipelines are infiltrated and the flow is normal.
Generally, the spiral dehydrator should clean the shell stains, but it should prevent connecting power circuits in the connecting power circuit of the motor, switching power box, etc. When the device is running, as the vibration is vibrated, check whether the screws in each connected position are loose and whether there is a gap at the welding.
The advantages of the spiral dehydrator are mainly manifested as:
1. The spiral dehydrator is suitable for various materials. It is widely used. It is not only suitable for fruit and vegetable juice, but also for dehydration treatment of waste, especially large particulate matter or long fiber materials.
2. The spiral structure of the mechanical equipment is reasonable, which can change the friction resistance direction when the material is squeezed, and solve the problem of material deviation.
3. The spiral squeezing dehydration machine runs stable and the dehydration effect is ideal. It can be customized according to the customer dehydration requirements.
The design parameters of the spiral dehydrator mainly have the following points:
1. Compression ratio
2. Spiral diameter
3. Motent
4. Electric power
5. Filling coefficient
The diameter, teeth distance and speed of the spiral shaft are three elements of the spiral dehydrator, which determines the production capacity of the spiral dehydrator. We usually use tons as a metering unit for industrial production. From the perspective of the working principle of the spiral dehydrator, it is based on the completion of the volume (m³), and the feeding volume is converted into the feed weight-ton/h, which needs to be measured.
If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com
