Screw separators are widely used in solid-liquid separation equipment, pharmaceuticals, food, winemaking, papermaking, biological pellet fuel, concentrated feed, urban waste treatment, kitchen waste treatment, organic fertilizer, cassava starch, sugar, chemical plants, synthetic fibers, Tobacco, synthetic fiber, aquaculture: paint, livestock manure treatment and other fields. Treatment of various high and low temperature and waste materials, such as: wine tank, paper paddle, bamboo paddle, sludge, raw pulp paper, bagasse, residue, straw, wine tank, wood residue, fruits and vegetables, wood chaff, livestock and poultry manure sewage, Grain crops, potato dregs, peel dregs, straw, tapioca starch, maltitol, straw pulp, cotton pulp, seaweed, bamboo pulp, livestock and poultry extrusion deoiling, tea dregs, paper industry waste residue, waste, waste paper pulp, etc.

The manufacturing requirements of the screw separator:

1. Reducers, motors, couplings, transmission chains and other transport and transmission components have no abnormal phenomena and run smoothly: the data mark value of the speed-regulating motor should be consistent with the actual speed.

2. The components and parts in the equipment must pass the inspection before they can be installed.

3. The welding parts of the weldment should be smooth and flat, without problems such as electric welding, welding, and welding difficulties

4. The coating or coating on the surface of the metal material roller must be strong, wear-resistant and corrosion-resistant. The adhesive of the metal material roller of the rubber-lined pipe should be closely connected with the metal surface, firm and not fall off.

5. After the equipment is installed, the center lines among all the rollers should be parallel, and the flatness should not be lower than the standard value.

6. Rollers with a diameter of more than 300mm must be balanced by the center of gravity point balance method. After the roller is installed, it is stipulated to be in a static state.

7. According to the requirements of primer and topcoat, the painting should be detailed, uniform, fine and bright, not smooth and uneven, let alone paint leakage, etc., and the paint film should be free from cracks and other problems.

The screw separator has the following advantages:

1. Applicable to a wide range of industries, the equipment runs smoothly, and the machine structure is reasonable

2. Professional manufacturers, professional R & D team

3. The equipment can realize continuous extrusion dehydration

4. Low energy consumption, large production capacity, high dryness of slag discharge

5. It can be customized, and the manufacturer will guide and repair for free for a long time

6. Unique back pressure resistance equipment

The pressure plate resistance equipment control of the slag discharge port is to effectively complete the automatic control of the discharge dryness through a specific design, that is, after setting a certain extrusion force, the device will automatically realize force control. The rear of the discharge port is equipped with cylinder automatic pressure plate resistance equipment. The discharge resistance and size of the slag outlet can be changed through the pre-tightening force and position, which is used to adjust the dry humidity of the dehydration slag, and is more suitable for the design of uneven feeding, and the user can adjust it according to the actual use.

If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com