Maintenance of cow manure processing machine:

1. The surface of the box of the mobile device should be cleared of dust and other objects. When the machine encounters unbreakable materials, it will move the bearings to the chassis, causing serious accidents.

2. When the bearing oil temperature rises, the reason for stopping and checking should be eliminated immediately.

3. If there is a knocking sound when the rotating gear is running, it should be stopped immediately to check and eliminate it.

4. The bearing bears full load in the negative machine, so good lubrication performance is closely related to the bearing life. It directly affects the service life and running speed of the chicken manure dehydrator. Therefore, the injected lubricant must be clean and well sealed. Main injection points (1) Rotary bearings (2) Roller bearings (3) Full gear bearings (4) Surface bearings and sliding surfaces.

5. The newly installed cow dung treatment electromechanical box is easy to loose and must be checked frequently.

6. Pay attention to the normal operation of cow dung treatment parts.

7. Pay attention to check the wear degree of wearable parts, and replace worn parts at any time.

Cleaning method of cow manure processor:

In normal use, it should be cleaned in time after six months. When cleaning the cow dung processor, first remove the discharge outlet bolt, then take out the mesh screen, and use a high-pressure water gun and a wire brush to clean the blockage in the mesh screen. It is particularly worth noting that the original installation position of the screen is maintained. Note the position of the screen guides when removing the screen. Mark the housing and keep it in place when installing. Otherwise, the wear and tear of the screen will increase during future operation. It will affect the working efficiency of the dehydrator.

The maintenance work of the cow dung processor should be done well in winter low temperature:

After use in autumn, the cow manure processor can be temporarily out of use. During this period, it is necessary to do a good job of improvement and protection to lay the foundation for large-scale production of spring plowing, which is a reasonable and effective measure to prolong the service life of cow dung processing equipment. Measures such as temperature control, moisture protection, mold pressure wheel replacement, connection part inspection, grease renewal, gearbox cleaning, and power maintenance of the cow dung processor are all to eliminate hidden dangers of the cow dung processor equipment and lay a solid foundation for large-scale production in the spring. A solid foundation provides effective hardware protection.

Continuous production of manure processors is selling and accumulating fertilizer pellets in the spring to support businesses and employees. It not only includes the maintenance of cow dung processing equipment in winter, but also puts forward new requirements for the working environment of fertilizer raw materials and cow dung processing machines. The outdoor temperature is low in winter, which is harmful to the maintenance and operation personnel of the cow dung treatment equipment itself. Moreover, the lubricating oil in winter is viscous and solidified at low temperature, and the lubricating oil for the working machine is not in place or the effect is slow. Therefore, when working indoors, insulation measures should be set up. Continuous production in winter is also related to the handling of raw materials and raw materials. Storage of abundant raw materials, appropriate water and reasonable fermentation equipment are the keys to continuous production of cow dung processing machines.

The cow manure processor solves the environmental pollution problem of cow manure:

Dairy farms provide residents with abundant eggs, meat, milk and other products, and dairy cows and cow dung have also caused serious environmental pollution. A deteriorating ecological environment will affect people's health. Studies have shown that the spread of some diseases is often caused by the contamination of poultry manure after people drink ground water. The pollution of cows and cow dung can be said to be very serious. The relevant departments of the world to solve these problems have noticed this. On November 26, 2001, the "Livestock and Poultry Breeding Pollutant Discharge Standard" and "Livestock and Poultry Breeding Pollution Control Technical Specifications" were promulgated, which provided the necessary legal basis for solving the problem of cow manure pollution.

If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com