What requirements should be met to operate the chicken manure dehydrator?

1. The road surface is reinforced concrete, the opening direction of the road surface groove is inclined, the slope is 1 degree, there is no sewage ditch on the slope, and the sewage is discharged into the waste water storage facility. The pavement should be able to bear the load of feces transport vehicles and store feces, and the ground should be waterproofed. The anti-seepage performance requirements comply with the relevant regulations of GB and 8598.

2. The wall surface should not exceed 1.5m, adopt brick-concrete or concrete upper structure, cement plaster surface, wall thickness not less than 240mm, anti-seepage requirements according to GB50069 citrus customs regulations.

3. The canopy is set up on the facility, and the net height between the lower porch of the canopy and the surface of the facility is not less than 3.5m.

4. Other conditions: Rainwater ditches shall not be set up around the living pool, rainwater ditches shall not run side by side with sewage ditches, protective facilities such as obvious symbols and fences shall be set up around the living pool, and special channels shall be set up to communicate with the outside world to prevent feces from being transported through the living and production areas .

Application value of chicken manure dehydrator:

The dry cow manure processed by the chicken manure dehydrator can be fermented into high-quality organic fertilizer products. It can loosen the soil, improve the soil caking condition, improve the trace elements in the Aohe land, and improve the soil fertility. Therefore, adding a chicken manure dehydrator is not only a unilateral and simple solution to the problem of chicken manure pollution, but also brings additional benefits.

Chicken manure dehydrator is a dehydrator specially used for poultry manure treatment (chicken manure, cow manure, pig manure, etc.). ), pump the diluted feces into the pump of the extrusion auger and the screen through the pump, and then perform screw extrusion. One water outlet discharges the separated stored water, and the other water outlet is the water outlet, and the moisture content of the dry material is generally between 40% and 60%.

If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com