Standard use of cow manure press dehydrator:
Firstly, connect the host motor, run it to make sure that the rotation direction of the screw shaft is correct, close it, and then fill the discharge port of the machine with material slag or waste newspapers and fabrics with a water content of 70%, and then adjust the torque at the position of the balance weight to form the pressure layer of the extruder . An extruder that is not filled with a pressure bed cannot be started. Because after pumping the manure, the discharge port will spray out immediately. Remember to fill and fill the discharge port! The use of the extruder should be managed by a special person. Managers should understand the performance of the whole machine and maintain it regularly. Generally, during normal use, the mesh screen should be cleaned once every two months.
When cleaning, first take out the bolt of the discharge port of the cow dung press dehydrator, then take out the mesh screen, and clean the blockage in the mesh screen with clean water and a copper wire brush. It is particularly worth noting that the original installation position of the mesh screen is maintained. When taking out the mesh screen, please pay attention to the slide rail position of the mesh screen. It is recommended to mark and keep it in place when installing. Otherwise, in the future operation, the wear of the mesh screen will increase, which will naturally affect the discharge efficiency of the extruder.
Main features of cow dung press dehydrator:
It has the characteristics of small size, low speed, simple operation, convenient installation and maintenance, low cost, high efficiency, fast investment recovery, and no need to add any coagulant; The blades and screen are made of stainless steel, and the spiral blades are treated with alloy, which can prolong the service life of the whole machine.
If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to:chuantaiscrewpress@gmail.com